The Pharmaseal® exhaust housing is a simple, yet highly effective solution for exhaust and recirculation applications in pharmaceutical and biotechnology facilities, hospitals, surgical suites, neonatal care units, animal labs, sterile manufacturing areas and the food processing and packaging areas.
The Pharmaseal allows a maintenance friendly filter change from within the room, through a removable stainless steel filter face grille.
The Camfil Farr roomside replaceable exhaust housing:
- Enclosure is manufactured from 0.63 aluminum or 304/304L stainless steel. All units include 304 stainless steel grille and trim.
- Is bubble leak tested to 3.0" w.g. to ensure that the housing will not leak under normal operating conditions. The housing is also visually inspected at the factory and tested for filter fit before shipment.
- Mounting hardware is available, as are the choices of an inward-turned flange, an outward-turned flange or an integral plenum with 12" round flex duct connection.
- The unit includes integral flush perimeter trim. Unit may be mounted in sheet rock walls, plaster, conventional aluminum or stainless steel honeycomb panels.
- Is available in four standard filter configurations, a 100mm filter with 30/30® prefilter, a Filtra 2000 filter with prefilter and a Filtra 2000 without a prefilter.
- Includes integral filter guides that ensure proper filter fit within the gel to knife edge alignment with the filter.
- Includes a static pressure port with quick-disconnect fitting for conventional roomside filter evaluation.
Optional test shroud and sampling ports allow all efficiency measurements from the roomside. A flat plate damper is also available when the need for 'bubble-tight' is not required. All damper options are controlled from the room minimizing down time to the controlled space.