Crude oil price graph The price of crude oil has more than doubled over the past few years, and the cost of electricity is steadily growing in all countries. Furthermore, developing countries are becoming increasingly industrialized and their energy needs are soaring.
The filters are the most inexpensive part to improve
It is well known that building ventilation is costly. The typical energy cost of filters as a percentage of the total system is approximately 30%. Selecting the correct filter, i.e. Camfil Farr F7 filter efficiency and lowest pressure drop, can create significant savings on energy while maintaining healthy Indoor Air Quality (IAQ)
1 Pa = 1 Euro
A rule of thumb for a typical installation running half time over one year is that one additional Pascal in pressure drop over a filter adds 1 Euro in extra energy cost. A poor filter design can add 50 Pascal compared to a good design. In other words, it adds 50 Euro on the annual energy bill – per filter!
Life Cycle Cost (LCC)
From a long term perspective, it is evident that energy consumption is the major overall cost of a filter.
70 % of the cost is energy!
Calculations reveal that energy normal accounts for 70% of the system's total LCC. The energy consumption is directly proportional to the average pressure drop over the filter.
Choosing the right filter saves energy
Camfil Farr has been a pioneer in designing low average pressure drop filters in all filter classes for the last 40 years. Many people assume that the filter efficiency is the largest contributor to initial pressure drop, when in fact the actual design of the filter has the main impact.
Beware of Camfil Farr imitations
Air flow A rival filter with the same number of pockets will not necessarily have the same average pressure during its lifetime. In the case of bag filters, our unique tapered stitch allows full utilization of the media resulting in extended life and low energy cost. Having established that Camfil Farr has the lowest average pressure drop, you should then select a filter to achieve the desired IAQ level for your application. Always check for the minimum efficiency as reported in the European standard EN779:2002
Energy saving filters
Camfil Farr has developed software to determine precise LCC cost for a particular filter, in any given system, with its unique conditions and requirements. The program can be adjusted according to your outdoor air characteristics and your specific cost for filters, labour, disposal cleaning and energy.
Calculation example
In the second example, we have replaced the first filter with another filter of the same filter class (F7). While the filter has the same size and similar material, the manufacturer’s less favourable design results in a 20 Pa higher pressure drop over the clean filter. As a result, the energy consumption is affected. The total cost increased by 23 Euro per year – per filter!
Recommendations from Camfil Farr
Key products
Prefilters