Camfil Farr Annual Bed Carbon filters represent the ultimate in performance for gas phase air cleaning. They are particularly suitable for extracting ventilation in process applications where extremely high efficiency levels are required to satisfy statutory and local authority regulations for odour control and atmospheric emissions.
Camfil Farr Annual Bed Carbon filters are available in two ranges. Range One items are intended for smaller air flows and operate with relatively low pressure loss values. These items are available in polypropylene, and can therefore be used in corrosive environments such as chemical plants and vacuum pump discharge. Range One is also available in stainless steel or mild steel. The larger Range Two units are manufactured in either carbon steel or stainless steel.Features:
- Suitable for small to very large air flows
- Extended contact times - 0.3 to 5 seconds
- Very high removal efficiencies
- Inherently leak-free
- Simple to install and operate
- Replace only carbon media
- Options on materials and finishes (corrosive environments)
- Access ladders and platforms (internal and external)
- Gauges and gas detection equipment
- Full turnkey installations with ducting, fans, controls, etc.
- Monitoring of condition carbon
- Site emptying/ recharge / disposal
- Manufacture of polyurethane foam, removal of toluene diisocyanate (TDI) 100,000 m3/h
- Manufacture of pesticides 42,000 m3/h
- Chemical process using pyridine 5,000 m3/h
- Chemical process using DMS 3,000 m3/h
- Vacuum pump discharge
- Flame lamination of polyurethane foam, removal of TDI, hydrogen cyanide, benzene, amines 14,000 m3/h
- RIM process, control of cyclo-pentadiene 10,000 m3/h
- Manufacture of slug pellets 25,000 m3/h
- Chemical process using furfural 15,000 m3/h